SILICONFETT 300 mittel/BLQ
Low-temperature silicone grease on a lithium soap base
Performance Features
- Approved by the German Institute MPA, Stuttgart, for use as lubricant in plain bearings of bridges
- temperature range: -70 / +160°C short term up to 200°C
- very good thermal and low temperature stability
- high degree of ageing stability
- good elastomer and plastic compatibility
- low evaporation losses
- good water resistance
- good resistance to mineral oil
- tested according EN 1337-2
Description
SILICONFETT 300 mittel/BLQ is a lithium-soap lubricating grease resistant to ageing, based on a special methylphenyl silicone oil with outstanding low temperature properties.
Field of application
SILICONFETT 300 mittel/BLQ is especially recommended for the lubrication of bridge plain bearings, for sliding films and other sliding combinations of plastics/metal.
Method of application
SILICONFETT 300 mittel/BLQ is preferably applied manually.
Note
SILICONFETT 300 mittel/BLQ is also available in other consistency grades (light, heavy) under the name CHEMPLEX SI 300. These qualities are, however, not approved.
Industries
- Construction
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.