GLEITMO SFL 9680
3-component, solvent-based
Solid Film Lubricant
Performance Features
- temperature range for use: -70/+180 °C short term up to 250 °C
- transparent
- forms a dry, thin lubricant film with a very low coefficient of friction
- good adhesion on rubber materials, e.g. NBR, EPDM, VMQ…
- largely resistant to water, mineral oil and fuels
- exceptional non-stick and separating characteristics
- facilitates assembly of sealing parts
Description
GLEITMO SFL 9680 is an air-drying 3-component Solid Film Lubricant based on a special binder and solvent.GLEITMO SFL 9680 forms a dry lubricating film, which is distinguished by its excellent lubricating effect and high degree of abrasion resistance.
Field of application
GLEITMO SFL 9680 is used primarily for the dry lubrication of rubber materials. GLEITMO SFL 9680 leads to very low coefficients of friction thus facilitating the assembly of parts.
Method of application
The mixture of GLEITMO SFL 9680 (K1+K2+K3) is ready for use. According to the application requirements it might be suitable to dilute the mixture with an adequate thinner. The workability time of the mixture is approximately 5 hours.GLEITMO SFL 9680 can be applied by spraying or dipping. The parts should be degreased prior to coating. To improve its adhesion on rubber materials, a plasma pre-treatment may prove beneficial.GLEITMO SFL 9680 cures at ambient temperature and forms a lubrication-effective coating. To achieve an enhanced mechanical and chemical resistance of the coating, curing at 100 - 150 °C is required.
Note
Shelf life of the single components: 12 months in closed original containers at room temperature.
Industries
- Automotive
- Machinery, equipment
Specifications
Approvals
FUCHS Recommendations
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.