LUBRODAL AL 50
Release agent for pressure die casting
Performance Features
- good lubricating and parting properties
- clean casting surfaces
- excellent wetting properties and mould cooling
- no build-up of residues or sticking
- can withstand high thermal strain
- economical to use
Description
LUBRODAL AL 50 is a stable emulsion which can be sprayed on to lubricate moulds in pressure die casting of aluminium and other non-ferrous metals. LUBRODAL AL 50 contains special additives which provide a high degree of lubricating and parting efficiency. It is easy to spread in a thin layer over the die. LUBRODAL AL 50 does not form any protruding substances or residues in or next to the moulds. The vents are not clogged. The casting surfaces are clean and light and can be surface-treated after careful cleaning of residues.
Application
LUBRODAL AL 50 is supplied in concentrate form and must be diluted with water prior to using. The mixture ratio depends on the specific casting and spraying parameters and especially on die temperature and complexity of the casting. The recommended ratio is 1:40 to 1:80. The optimal rate of dilution has to be determined in practice.
Application
LUBRODAL AL 50 can be applied by using hand spray guns, static and automatic spraying equipment. To achieve an effective, even coverage, use a spray with an adjustable nozzle and adjust the air-liquid ratio. We recommend the spraying equipment to be cleaned at regular intervals (once a week) by flushing through with water. The equipment should be cleaned in this way if it is going to stand idle for any period of time.
Industries
- Casting
- Metal processing
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.