RENOLIN UNISYN OL 46
Description
Compressed air has become a major form of energy and the reliable generation of compressed air is vital. Operators require compressors to function perfectly over and beyond entire service intervals. The RENOLIN UNISYN OL series was developed to meet the increased requirements of compressor manufacturers on the service life of compressor oils. Due to the function of compressors, intensive swirling of the cooling oil and air occurs. At high compression temperatures, the oils are subjected to a strong oxidative attack that accelerates ageing.
Properties | 46 |
Kinematic viscosity at 40 ºC at 100 ºC |
46 mm2/s 7,9 mm2/s |
Viscosity Index | 146 |
Density at 15 ºC | 843 kg/m3 |
Flashpoint Cleveland | 260 ºC |
Pourpoint | < -60 ºC |
Applications
RENOLIN UNISYN OL products are recommended for use in flooded or oil injection screw-type air compressors and turbo compressors (ISO VG 32, 46, 68) and for piston and rotary vane compressors (ISO VG 100, 150).
RENOLIN UNISYN OL products should always be used if mineral oil-based products are found to display insufficient thermal stability (resistance to ageing) or poor viscosity-temperature behaviour.
Compared to mineral oil-based oils, RENOLIN UNISYN OL products foam less, offer better demulsification and have superior air release properties.
The use of RENOLIN UNISYN OL products is especially recommended in unfavourable conditions and at high temperatures in which other oils fail because they allow coke to form, thus leading to unacceptably short oil life. These oils are also recommended for compressors which are subject to extreme loads.
Compared to mineral oil products, the life of RENOLIN UNISYN OL products is considerably longer, operational reliability is much improved and breakdowns are effectively reduced (service intervals can be extended).
RENOLIN UNISYN OL products can also be used as hydraulic fluids, especially with good lowtemperature behaviour.
Industries
- Consumer, aftermarket
- Mining, quarrying, exploration
- Agriculture, forestry
- Power generation
- Construction
- Transport
- Machinery, equipment
- Cement
- Forging
- Casting
- Metal processing
- Other industries
- Steel, metals
- Glass industry
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.