TITAN CARGO MAXX II SAE 10W-40 New
Description
TITAN CARGO MAXX II SAE 10W-40 is a Premium Low-SAPS engine oil with the innovative XTL®-Technology developed for commercial vehicles. The
XTL®-Technology (Xtreme Temperature Lubrication) offers maximum fuel economy over the whole drain interval due to outstanding oxidation and ageing stability. TITAN CARGO MAXX II SAE 10W-40 provides an optimum protection for modern diesel particulate filters and catalysts as well as an improved durability.
Due to minimum evaporation loss, the oil consumption and turbocharger deposits are significantly reduced. This new technology offers maximum performance over the entire temperature range and ensures good cold start properties even at very low temperatures. TITAN CARGO MAXX II SAE 10W-40 exceeds conventional UHDP lubricants in versatility and performance.
Advantages/Benefits
- Additional reduction of the fuel economy over the whole drain interval up to 0.6% compared with quality engine oils of the same SAE viscosity grades
- Prevents from deposites in engines and turbochargers
- Improved ageing stability due to XTL® and lower viscosity increase in a standardized engine test
- Best protection for modern exhaust gas after treatment systems
- Excellent wear protection even under high operation conditions
- High neutralization behavior against sour burning residues in combination with latest Low-SAPS technology
- Fulfills all latest ACEA Ex specifications (ACEA E9/E7/E6/E4) in combination with API CK-4
- TITAN CARGO MAXX SAE II 10W-40 offers a wide application profile and is the rationalization product for mixed fleets
Application
TITAN CARGO MAXX II SAE 10W-40 is specially developed for commercial vehicles with turbocharging and modern exhaust gas treatment systems. Because of the extensive performance profile TITAN CARGO MAXX II SAE 10W-40 is suitable as a rationalization product also for older vehicles. TITAN CARGO MAXX II SAE 10W-40 meets all latest ACEA Ex Specifications in combination with API CK-4.
TITAN CARGO MAXX II SAE 10W-40 is miscible and compatible with conventional branded engine oils. In order to fully utilize the product’s benefits, mixing with other engine oils should be avoided and a complete oil change is recommended when converting to TITAN CARGO MAXX II SAE 10W-40.
For information on product safety and proper disposal please refer to the latest Material Safety Data Sheet.
Industries
- Automotive
- Transport
Specifications
ACEA E9/E7/E6/E4
API CK-4/CJ-4
CAT ECF-3
JASO DH-1/DL-0
JASO DH-2
Approvals
CUMMINS CES 20081
CUMMINS CES 20086
DEUTZ DQC IV-18 LA
MACK EOS-4.5
MAN M 3775
MB 228.31
MB 228.51
MB 228.52
MTU DDC TYPE 2.1
MTU DDC TYPE 3.1
RENAULT RLD-3
SCANIA LA
VOLVO VDS-4.5
FUCHS Recommendations
DETROIT DIESEL 93K218
DETROIT DIESEL 93K222
IVECO 18-1804 CLASSE TLS E9
IVECO 18-1809 CLASSE NG2
MAN M 3271-1
MAN M 3477
MAN M 3575
RENAULT RLD-4
VOITH-RETARDER „B“
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.