RENOCAST AP 4002 C
(formerly BITEEREX 2)
Performance Features
- emulsion concentrate
- good parting effect
- economical in use
Description
RENOCAST AP 4002 C is a mineral-oil-based bitumen release agent with emulsifying additives. Watery emulsions of this product reliably prevent the adherence of bitumen and asphalt.
Field of application
Transport vehicles, loading buckets, machinery, etc.
Method of application
RENOCAST AP 4002 C is delivered in concentrated form which is applied in practice at a ratio of 1:10 after being mixed in water (not vice versa). The emulsion thus formed should be used within one shift. Should a segregation of the mixture occur after a longer idle time the emulsion can be re-stabilized in a repeated mixing operation. Besides its parting function RENOCAST AP 4002 C also offers a good temporary protection against corrosion for ferrous metals. It may not be mixed with oils, solvents, etc.
Note
- The storage period should not exceed 2 years
- Store barrels on their sides
- Reseal packaging after removal
- Preliminary trials required
- Before use, check whether the criteria in the operating instructions for the system/device are met
Note the WHG and EC safety data sheet! Prior to its use on rubber-tire rollers, seals, etc., the compatibility with the elastomers should be verified. The product may not come in contact with zinc or galvanised materials.
Industries
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.