GLEITMO SFL 9580
Thermosetting PTFE solid film
lubricant with non-stick effect
Performance Features
- temperature range: -70 / +250 °C short-term: up to 270°C
- forms a dry, adhesive lubricating film
- resistant to solvents, mineral oil, and synthetic liquids
- very good non-stick properties
- allows lifetime lubrication
Description
GLEITMO SFL 9580 is a selected combination of solid lubricants, organic binders, and solvent. After hardening, GLEITMO SFL 9580 forms an adhesive, oil and solvent-resistant dry lubricating film with good tribological and corrosion protection properties. Furthermore GLEITMO SFL 9580 features excellent non-stick properties.
Field of application
GLEITMO SFL 9580 is characterized by its outstanding non-stick properties, thus preventing the adhesion of unwanted residues (e.g. from combustion processes, cataphoretic painting) on the component’s surface. GLEITMO SFL 9580 is used for running-in improvement and lifetime lubrication of components at low loads.
Method of application
The components shall be thoroughly degreased prior to their coating. GLEITMO SFL 9580 is applied by spraying. It can also be applied using dip centrifuge and/or drum coating equipment. To enhance its adhesion and thus its service life pretreatment by phosphatizing or sand blasting is recommended.
Note
Stir GLEITMO SFL 9580 well before use. Shelf life: 12 months in closed original containers at ambient temperature
Industries
- Machinery, equipment
- Other industries
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.