RENOQUENCH QHY 150
(formerly THERMISOL QHY 150)
Synthetic high-performance quenching oil - particularly recommended for highly warp-prone components
| Quenching performance |
Low |
| Application |
Bath quenching of batches |
| Material |
High-alloyed ferrous material |
| Type |
Quenching oils |
| Density at 15 °C | 0.92 g/ml |
| Bath temperature | 40 - 260 °C |
| Flash point | 312 °C |
| Kin. viscosity at 40 °C | 145 mm²/s |
The use of these quenching oils based on synthetic esters is particularly recommended for highly warp-prone components. Apart from their sustainability credentials, these high-performance quenching oils offer a number of other advantages. Synthetic high-performance quenching oils have significantly better wetting properties than their conventional counterparts. These excellent wetting properties ensure that the vapour phase over the whole surface of the component being treated collapses rapidly. This almost simultaneous wetting of the entire component surface significantly reduces the temperature gradients created during quenching and thus ultimately the uneven shape changes known as warping. Depending on the viscosity and the flash point these quenching oils can also be used as hot bath and martempering oils.
Industries
- Metal processing
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.
