RENOCAST RA 2930
(formerly SOK C/K100)
Concrete release agent, preferred area of application: precasting works
Performance Features
- operating temperature up to 70 °C (form temperature)
- may be used anywhere
- odorless during application
- suitable for the production of exposed concrete
- largely prevents pore formation
- does not impair the adhesion of plaster, adhesives and painting work
- contains an improved corrosion protection for steel shuttering
Description
RENOCAST RA 2930 s suitable for all absorbent and non-absorbent forms.
Field of application
RENOCAST RA 2930 is suitable for all forms, e.g. rough-sawn and planed wooden forms, steel forms, film and plastic-coated plates, polysulphide matrixes and ABS foil-coated systems.
Method of application
RENOCAST RA 2930 is applied thinly and uniformly onto the clean and dry form using a brush or a suitable spraying device (with UniJet TPU 800067-SS). Consumption: for non-absorbent forms: 50-90 m²/l; for absorbent forms: 30-50 m²/l.
RENOCAST RA 2930 should not be diluted with water, oil or solvent - it is ready to use !
Notes
- Store frost-free
- The duration of storage should not exceed 2 years
- Store barrels horizontally
- Seal container after use in order to prevent active ingredients escaping at higher temperatures
- Preliminary trials required
Please observe water resources policy act and EU safety data sheet!
Industries
- Construction
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.
