Technology Partnership FUCHS & DMG MORI
FUCHS and DMG MORI have a technology partnership since 2017. Within the framework of this partnership, FUCHS has taken over the fluid management in three plants of DMG MORI and for the most part also the supply of the exhibited machines on fairs.
Trade fair supply
The largest trade fair to date was EMO2017 in Hanover. Here an entire hall was filled with DMG MORI machines before the start of the trade fair, looked after during the trade fair and emptied at the end of the trade fair. More than 30 tons of water-mixed cooling lubricant were moved.
Fairs at which machines have been filled / emptied by FUCHS so far this year are the fairs NORTEC Hamburg, METAV Düsseldorf, GrindTec Augsburg, ILA Berlin, AMB in Stuttgart and the in-house fairs of DMG MORI in Pfronten and Bielefeld.
Project 1: DECKEL MAHO Pfronten GmbH
Fluid management started on January 1, 2018. The FUCHS service includes the filling, monitoring and maintenance of all lubricants used, with the cooling lubricant accounting for by far the largest share. The machines produced in the assembly department are supplied via three central systems, while the in-house production, the showroom and also an outsourced production hall in Vils (Austria) have individually filled systems. In the latter cases, the effort is therefore considerably greater.
All recorded data is documented in the FUCHS-CPM database. A consistently high process stability is proven by a regular evaluation of defined key figures.
Used cooling lubricants:
- ECOCOOL GLOBAL 10 PLUS (showroom),
- ECOCOOL R 2030 IDM (assembly),
- ECOCOOL S-FC IDM
- ECOCOOL Grindstar MBF
Project 2: Gildemeister turning machines Bielefeld
The fluid management project at Gildemeister in Bielefeld started on 1.1. 2018. The FUCHS CPM team looks after almost 200 machine parking spaces here. The cooling lubricant in all the machines built here is filled individually, replenished, monitored, maintained and later vacuumed again. All data collected, such as consumption quantities, measured values, service actions, etc. are documented and evaluated in the FUCHS CPM database. This also applies for the complex recycling process, in which the used emulsion is reprocessed, stored in double-walled storage containers and, if necessary, returned for use. Thisresults in savings in consumption and disposal and has a lasting positive effect on the environmental balance.
Used cooling lubricant:
Project 3: DECKEL MAHO Seebach GmbH
The project was started on 1. 4. 2018. The FUCHS CPM service supplies central systems and individually filled machines with cooling lubricant. The latter are located in production and in the showroom, while machine assembly is carried out by the is supplied centrally. As in the other two mills, the FUCHS CPM database is also used here, so that the documentation is complete and professional guaranteed.