TITAN Supersyn F Eco-FE SAE 0W-30
Description
TITAN SUPERSYN F ECO-FE SAE 0W-30 is an Ultra High Performance engine oil for passenger cars and light commercial vehicles. TITAN SUPERSYN F ECO FE SAE 0W-30 was developed based on selected base oils and state-of-the-art additive technology. The special composition of TITAN SUPERSYN F ECO-FE SAE 0W-30 provides optimised ageing stability, wear protection and cold-start properties during the entire oil drain interval. Significant improvements in fuel economy and CO₂ emissions were achieved by lowering the dynamic viscosity and employing a new additive technology of TITAN SUPERSYN F ECO-FE SAE 0W-30.
Application
TITAN SUPERSYN F ECO-FE SAE 0W-30 was developed for use in modern FORD diesel engines from model year 2014, which require an oil according to WSS-M2C950-A specification. TITAN SUPERSYN F ECO-FE SAE 0W-30 is not backwards compatible with older FORD specifications. Consequently, it may be only used in the approved applications! TITAN SUPERSYN F ECO-FE SAE 0W-30 is miscible and compatible with conventional, branded engine oils. However, mixing with other engine oils should be avoided in order to fully exhaust this product’s benefits. A complete oil drain is recommended when converting to TITAN SUPERSYN F ECO-FE SAE 0W-30. For information on product safety and proper disposal please refer to the latest Material Safety Data Sheet.
Advantages
- Especially developed for engines of FORD.
- Very good cold start properties and fast oil circulation in the whole engine at low temperatures.
- Sustainable fuel-economy potential.
- Can be used for extended drain intervals.
- Optimised wear protection.
Industries
- Automotive
- Consumer, aftermarket
Specifications
- ACEA C2
- FORD WSS-M2C950-A
Approvals
- JAGUAR LAND ROVER STJLR.03.5007
FUCHS Recommendations
- VWC 53035
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.