RENOCLEAN DMO 3026
Description
RENOFORM DMO 3026 is a net, non-soluble, chlorine-free oil for forming and deep drawing of ferrous alloy parts.
Application
- RENOFORM DMO 3026 is a product specially formulated for steel forming operations.
- RENOFORM DMO 3026 in a product compatible with the use of intelligent vision equipment for the detection of stamping faults.
- RENOFORM DMO 3026 is suitable for medium and high severity drawing processes at low speed and with specially coated dies and punches.
- Cold stamping, but in processes and materials where the deformation process generates a large amount of heat, raising the temperature of the part and the dies and/or punches.
- It forms a lubricant film that is highly resistant to the high temperatures generated in the most severe stamping processes.
Benefits / Advantages
- RENOFORM DMO 3026 is a product with a high lubricating capacity and therefore its use leads to a longer life of dies and punches.
- The special additives provide a perfect surface finish of the processed material thanks to the high consistency of the lubricant film and the extreme pressure additive.
Industries
- Metal processing
- Steel, metals
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.