RENISO LPG New
Synthetic lubricants for hydrocarbon HC refrigerants
The RENISO LPG series is based on a special synthetic polyalkylene glycol (PAG) fluid. When choosing the base liquid, the focus was on the low hydrocarbon dissolution and thus the lowest possible dilution under the influence of refrigerant. The latest additive technology ensures high aging and thermal stability, reliable wear protection and a reduced tendency to foam. In particular, the suppression of the foaming of oil when the pressure drops is an important criterion for reliable wear protection.
The RENISO LPG series has good miscibility with hydrocarbon refrigerants. For this reason, with the RENISO LPG series a safe oil transport and an unimpaired heat transfer in the circuit can be guaranteed. The RENISO LPG series is suitable as refrigeration oils for
all hydrocarbon refrigerants - including propane R290, propylene R1270 or isobutane R600a / butane R 600. Both reciprocating and screw compressors are reliably lubricated with RENISO LPG.
The RENISO LPG series is used in refrigeration / air conditioning applications as well as in heat pumps. The products of the RENISO LPG series can also be recommended for the transport and compression of natural gas.
Properties of the RENISO LPG series:
- Synthetic, based on PAG
- Good miscibility with hydrocarbon refrigerants such as propane
- Reduced refrigerant dissolution and thus less dilution and lower viscosity loss
- Favourable foaming behaviour during outgassing of the refrigerant
- Reliable wear protection
- High resistance to aging
- High thermal resistance
- Very favourable viscosity-temperature behaviour: very high viscosity index (VI = 186): for increased lubricant film thickness
Industries
- Other industries
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.