Jump to content

THERMISOL QH 35 MC

High performance quenchant based on high-quality, low evaporation and low-aromatic hydrocracked oils. MC - the key is a special manufacturing process in which natural mineral oil is converted by hydrocracking, i.e. under high pressure and high temperatures in the presence of H2 (hydrogen). This creates a more cost-effective base oil which is comparable to synthetic
oils. This base oil together with high-quality additives combines the oxidation stability and the optimum wetting properties of high-performance quenching oils with the thermal stability and
extremely low evaporation of hydrocracked oils.
THERMISOL QH 35 MC is a universal high-performance quenching oil with best performance values and high process reliability.

 

Kinematic viscosity at 40 °C37 mm²/s
Density at 15 °C0.85 g/ml
Flash point 236 °C
Temperature range / bath temperature 40 - 100 °C (max. 150 °C)

 

Main application area 

Hardening of unalloyed and alloyed case-hardening steels, quenched and tempered steels and tool steels. Can be used in open and closed plants, for batches and continuous processes.

Industries

  • Metal processing
Note

The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.

Contact us
Phone
+49 (0) 621-3701-0
Service Contact
+49 (0) 621-3701-0