GLEITMO RLC 3100
2-component water-based PTFE Solid Film Lubricant
- Temperature range for use: -70/+250 °C
- forms a dry, firmly adhering lubricant film
- adheres very well on rubber materials (e.g. NBR, EPDM…)
- largely resistant to water, mineral oils and fuels
- good non-stick and release characteristics
- facilitates the assembly of sealing elements
- high abrasion resistance
- eco- and user-friendly
- suitable to produce colored coatings
- contains a UV additive for a UV coating inspection (340-380 nm)
GLEITMO RLC 3100 is an air drying 2-component Solid Film Lubricant having PTFE as a constituent for lubrication efficiency. The product forms a dry lubricating film, which is distinguished by its excellent lubricating effect and high degree of abrasion resistance. GLEITMO RLC 3100 is largely resistant to mineral oils and fuels.
Field of application
GLEITMO RLC 3100 is mainly used for dry lubrication of rubbers and polymer materials. GLEITMO RLC 3100 can be pigmented with color additives from the “GLEITMO Colour” range in order to achieve colored, covering coatings (e.g. on O-rings).
Method of application
The parts to be coated must be thoroughly degreased using a suitable cleaner. Component 1 (K1) should be stirred well before use.
100 parts [wt%] GLEITMO RLC 3100 K1 +
2 parts [wt%] GLEITMO RLC 3100 K2.
The mixture GLEITMO RLC 3100 (K1 and K2) is ready for use but may additionally be diluted with water subject to the application requirements. Pot life: It is recommended to use the batch within a period of 3h max.
GLEITMO RLC 3100 may be applied by spraying, dipping or using a spraying drum. In order to achieve quicker drying and improved wetting and adhesion of the coating, the parts may be preheated to about 70-80°C before coating.
Protect from freezing!
Stir well before use!
Shelf life of single components: 12 months in closed original container at room temperature.
- Machinery, equipment
- Other industries
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.