VITROLIS NRL 46
Neck Ring Lubricant
Advantages/Benefits
- Low viscosity compared to conventional swabbing compounds allows for more uniform / even coatings to be applied
- Excellent wetting and film strength properties ensure good release from the blank
- Lower levels of carryover of graphite and carbonaceous material from the mould to the container neck reduces the incidence of neck ring faults and rejects
Description
VITROLIS NRL 46 is a light to medium viscosity lubricant and release agent especially designed for lubrication of neck rings in the glass container forming process.
It is primarily designed for production utilising the NNPB process but may also be used on blow/blow and press/blow operations by applying a slightly lighter film than normal.
The formulation is based on a combination of colloidal graphite, sulphur based compounds and film forming/wetting agents.
Being colloidal in particle size, it enables stable formulations to be produced in low viscosity base fluids. This in turn allows for the application of a lighter and more even lubricant film – thus reducing the build up of carbonaceous material on the neck ring and transfer of these residues onto the neck of the formed container.
Mixing Instructions
VITROLIS NRL 46 is supplied in a ready to use form and does not normally require dilution. However, in the event that the residual film produced is regarded as slightly too heavy then the product can be cut back with a lower viscosity mineral oil, for example hydraulic oil.
Storage
Drums should be stored on their sides in a clean, dry place and should be protected from extremes of temperature.
Industrije
- Glass industry
Informacije prikazane na ovoj strani temelje se na iskustvu i stručnosti grupe FUCHS u segmentu razvoja i proizvodnje maziva, a predočuju trenutno stanje tehnike. Na performanse naših proizvoda može utjecati niz čimbenika, a osobito specifična upotreba, metoda primjene, radno okruženje, predobrada dijelova, moguće vanjsko onečišćenje i slično. Zbog toga ne možemo dati univerzalno važeće izjave o funkciji naših proizvoda. Naši se proizvodi ne smiju upotrebljavati u zrakoplovima / svemirskim letjelicama ili njihovim dijelovima. To se ne odnosi na slučajeve kada se proizvodi mogu ponovno ukloniti prije ugradnje dijelova u zrakoplov odnosno svemirsku letjelicu. Informacije koje su ovdje navedene općenite su i neobvezujuće smjernice. Ne dajemo nikakva izričita ni prešutna jamstva vezana za svojstva proizvoda ili za njegovu prikladnost za određenu primjenu. Stoga vam preporučujemo da se obratite inženjeru tehničke podrške grupe FUCHS kako biste raspravili o uvjetima primjene i kriterijima radne izvedbe proizvoda prije nego što ih upotrijebite. Korisnik je odgovoran za testiranje funkcionalne prikladnosti proizvoda i upotrebu proizvoda uz dužan oprez. Naši su proizvodi podložni neprestanom daljnjem razvoju. Stoga zadržavamo pravo na izmjenu naše palete proizvoda, samih proizvoda i njihovih proizvodnih procesa, kao i pojedinosti navedenih na ovoj stranici, u bilo kojem trenutku i bez upozorenja, pod uvjetom da ne postoje specifični ugovori s kupcima koji to ne bi dopuštali.