DECORDYN 350 SPRAY
Anticorrosion wax with good lubricating effect
Performance Features
- temperature range of the protective film: -40 / +70 °C
- touch-dry and long-lasting wax film
- colourless, transparent in appearance
- prevents formation of corrosion over long periods
- preserves tools and machines in ready-to-operate condition
- protects metal parts against corrosive influences in the air during transportation
- can be applied easily and economically, even electrostatic
- lubricates well, does not need to be removed before the parts are put into operation
Description
DECORDYN 350 SPRAY is a liquid anticorrosion product, which, after the evaporation of the non-polluting solvent, forms an adhesive, colourless protective film, possessing good lubricating properties. Thus it does not have to be removed before the parts are used.
Field of application
DECORDYN 350 SPRAY is used for the storage of machine parts, plastics injection moulding, casting moulds, punching-, stamping-, bending- and drawing-tools which have to be stored for periods of time but must be in ready-for-use conditions all the time.For bright machine parts and devices e.g. slide bars, guide rails, clamping alignment surfaces, which have to be reliably protected against corrosion before dispatch.For intermediate storage of high-value semifinished parts in a highly corrosive ambience.In all cases in which the removal of other anticorrosion films is necessary before use.
Method of application
Apply DECORDYN 350 SPRAY uniformly from the spray can onto the parts to be protected. In case of extremely strong corrosive influences it is recommended to increase the thickness of the protective film by repeated applications onto each dry film. During application be sure to have good ventilation.DECORDYN 350 is also available in standard packaging and these can be applied by spraying, immersion, electrostatically or via brushes onto the dry surfaces.
Note
DECORDYN 350 SPRAY should not be stored at a temperature below freezing point.
Industries
- Agriculture, forestry
- Cement
- Construction
- Forging
- Machinery, equipment
- Metal processing
- Mining, quarrying, exploration
- Other industries
- Power generation
- Transport
- Steel, metals
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.