Jump to content

SOK 2/K105

Concrete release agent perferably for the use in precasting plants

Performance Features

  • Temperature range up to 100°C (form temperature)
  • universally applicable
  • suitable for the production of exposed concrete
  • prevents pore formation to a large extent
  • provides clean and uniform surfaces
  • no impediment to plaster, adhesive, and paint adhesion
  • contains an effective corrosion protection for steel forms

Description

SOK 2/K105 is a concrete release agent which is suitable for all absorbent and non-absorbent forms. The aromates of the solvent contained have been withdrawn to a large extent, with a positive effect on odor formation. SOK 2/K105 has a higher release effect than SOK U/K 105.

Field of application

SOK 2/K105 is suited for all forms, such as planed wooden forms, steel forms, film and plastic-coated plates, polysulfide matrixes and systems coated with ABS films.

Method of application

A thin and uniform coat of SOK2/K105 is applied with a brush or a suitable spraying device (with T jet nozzle SS 800067) to the clean and dry formwork. Consumption for non-absorbent formwork: 50 - 100 m²/l; for absorbent formwork: 40 - 80 m²/l.
SOK 2/K105 may not be diluted with water, oils, or solvents - the delivered concentration is ready for use!

Notes

- Storage temperature not below -5°C
- Storage period should not exceed 1 year
- Store barrels horizontally
- Reseal containers after use to prevent substances from escaping at increased temperatures.


WHG and EC safety data sheet are to be respected!

Industries

  • Construction
Note

The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.

Service Contact
+49 6301 32060