CEPLATTYN GT RN
Sprayable running-in lubricant for Open Gears
- temperature range: -10 / +140°C; application temperature >0°C
- smoothes and reduces surface roughness
- improves tooth flank quality
- extends the lifetime of the gears
- free of solvents and bitumen
- suitable for kiln and mill drives
- no self-ignition on the hot kiln shell
CEPLATTYN GT RN is a running-in lubricant for Open Gear drives on kilns and mills in the raw materials industry. Together with CEPLATTYN GT P and the operational lubricants of the CEPLATTYN GT/ CEPLATTYN SF range CEPLATTYN GT RN represents the FUCHS LUBRITECH Multi-Phase-Lubrication system for Open Gear drives.
Field of application
CEPLATTYN GT RN is used to smoothen the tooth surface of newly installed girth gears and pinions and for optimisation of the load carrying pattern.
Method of application
CEPLATTYN GT RN is applied via automatic spray systems. The lubricant quantity should be 2-3 times higher compared to operational lubricant quantities. Prior to each running-in using CEPLATTYN GT RN the gear shall be primed using CEPLATTYN GT P. We also refer to our Instructions for running-in for large Open Gears.
Shelf life: approximately 12 months
- Cement, lime, gypsum
- Mining, quarrying, exploration
- Power generation
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.