Jump to content

ECO-HYD 46 S

Environmentally harmless, readily biodegradable hydraulic oils based on synthetic ester

Performance Features

  • readily biodegradable according to OECD 301 B
  • good ageing and oxidation stability
  • outstanding viscosity – temperature behaviour
  • good wear protection
  • good corrosion protection
  • good shear stability

Description

ECO-HYD S oils are based on synthetic ester. They represent an environmentally harmless alternative to hydraulic oils based on mineral oil.

Field of application

With regard to the particular maintenance instructions ECO-HYD S oils can be used in all hydraulic devices within the temperature range from -30 °C to +90 °C in the container.

Method of application

As ECO-HYD S-oils are generally miscible with mineral oils. It should, however, be remembered that small residual quantities of mineral oil or corrosion preventives may impair the technical properties and entail a higher water hazard class. When changing the oil filling the hydraulics should be completely emptied and thoroughly rinsed. We recommend observing the changing guidelines of VDMA 24 569 and our respective Technical Information.
A compatibility with varnishes and seals cannot be generally guaranteed. We therefore recommend a prior check or using two-component varnishes.

Note

ECO-HYD S oils, which are based on a synthetic ester (HEES), surpass the specifications laid down in ISO 15380 and the minimum requirements according to the VDMA guidelines 24 568.

Industries

  • Agriculture, forestry
  • Cement, lime, gypsum
  • Construction
  • Machinery, equipment
  • Mining, quarrying, exploration
  • Other industries
  • Power generation
  • Transport
Note

The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.

Service Contact
+49 6301 32060