Jump to content

LUBRODAL F 318 N

Transparent forming lubricant

Performance Features

  • water miscible
  • increases die life
  • high wetting and cooling properties
  • improves the ability to transform forging parts
  • avoids failures
  • lowers the percentage of rejects
  • clean, effective operation

Description

LUBRODAL F 318 N is a water miscible die lubricant, free of graphite. It shows outstanding releasing-, lubricating- and propulsive effects and forms a white, adhesive releasing film of high lubricity on the engraved surfaces.

Field of application

LUBRODAL F 318 N is used in hot and warm forging of steel, in particular if graphite containing die lubricants cannot be used due to hygienic reasons. LUBRODAL F 318 N is especially designed for application by flooding and flushing, too.

Method of application

LUBRODAL F 318 N is a concentrate and must be diluted with water before application. It can be applied via suitable spraying systems but it is also suitable for an application in terms of splash water. A strong spray jet with adjustable throughputs of the nozzles as well as an adjustable air-fluid ratio are required.

Note

Standard values for the dilution of LUBRODAL F 318 N with water:
Difficult transformation: 1 : 5 - 10
Average transformation: 1 : 10 - 20
Simple transformation: 1 : 20 - 40
The optimal ratio of dilution has to be determined by operational tests.

Industries

  • Forging
Note

The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.

Service Contact
+49 6301 32060