ECOCUT HSG 211 HD
Cutting & Grinding Oil
Description
ECOCUT HSG 211 HD is a low misting non-chlorinated cutting oil intended for machining and grinding a wide range of ferrous alloys. This oil is proven in many severe applications including grinding of difficult alloys (including titanium & nickel alloys), gundrilling and broaching. Staining should be monitored when used to machine copper and its alloys. The special technology additive package in Ecocut HSG 211 HD was developed to achieve high performance metal removal rates in order to provide extended tool life and superior finishes. It is formulated with specially selected base oils and additives to minimize evaporation and misting yet remain filterable.
Advantages
- Free of chlorinated paraffins for easier waste disposal
- Low emission technology for an improved working environment
- Superior performance on difficult metals
- Maintains accuracy of grinding wheels for fewer wheel dressings, wear and lower scrap rates
- Effective for deep hole and gun drilling
- Approved for use in Kapp and Klingelnberg grinders
- Approved by Pratt & Whitney for CBN grinding under PMC 9296
Industries
- Metal processing
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.