ANTICORIT MKR 5
Water-Miscible Corrosion Prevention Concentrate
Description
ANTICORIT MKR 5 is a water-miscible corrosion preventive concentrate which mixes easily and shows high emulsion stability even when heavily conta-minated by dragged-in electrolytes. ANTICORIT MKR 5 forms a thin, oily, non-sticky and non-resinating film after drying, with high corrosion prevention in the salt spray test. ANTICORIT MKR 5 can be used to protect and clean, bare and phosphated metal surfaces.
Application
ANTICORIT MKR 5 may be applied by dipping or with a convenient spray application as an 8 – 25 % emulsion at about 70 °C. The film thickness depends on the chosen concen-tration of the emulsion. The valid safety regulations have to be taken into account.
Advantages
- Film thickness adjustable through dilution in water
- Excellent corrosion protection
- Easy to apply
- Free of barium
- Silicon-free
- Free of secondary amines through TRGS 615 ***), Point 2 (5)
Industries
- Metal processing
- Steel, metals
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.