PLANTOGEAR 460 S
Description
PLANTOGEAR S products are environmentally acceptable industrial gear oils based on special saturated synthetic esters which guarantee high ageing resistance and excellent wear protection - very good lubricity. The products have a good solvency (good detergent dispersant properties due to the polar ester base oils). PLANTOGEAR S products have high scuffing protection (FZG > 12). The selected antiwear/ extreme pressure additive system guarantees the wear protection of bearings due to the excellent FE8 roller bearing wear test results (excellent wear protection of roller bearings under severe conditions, high load, low velocity).
Application
PLANTOGEAR S products can be used as universal CLP industrial gear oils. PLANTOGEAR S products can be used in spur, bevel, planetary and worm gears,especially inenvironmentally sensitive areas. The products can also be used in drive systems in water protection areas where ground and surface water can be polluted by oil leakages. The formulation of PLANTOGEAR S series is based on fully synthetic saturated high-performance esters based on natural renewable resources. The products can be used in applications where the use of synthetic lubricants are of advantage.
Specifications
The products of the PLANTOGEAR S series fulfill and surpass the requirements according to:
- DIN 51517-3: CLP
- ISO 6743-6 and ISO 12925-1: CKC / CKD / CKE / CKSMP (from ISO VG 320)
- AGMA 9005/E02: EP
- European EU Ecolabel
The products are listed, recommended, approved by important gear manufacturers, resp. they fulfill and surpass their requirements.
Advantages
- Good corrosion protection
- Excellent wear protection for gears and bearings
- Excellent viscosity temperature behaviour, high viscosity index (VI)
- Miscible with mineral oil and polyalphaolefin gear oils
- Natural dissolving properties
- Highest shear stability
- Based on renewable resources
- Rapidly biodegradable (> 60% acc. to OECD 301 B)
- High resistance to ageing
- Good air release
- Low foaming
- Optimally suited for high and low temperature use
Industries
- Other industries
- Steel, metals
- Power generation
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.