SOK BTM HU 2
Concrete parting agent for use in finished parts plant
Performance Features
- temperature for use up to 90 °C
- formwork temperature)
- prevents pore formation to a great extent
- ensures clean and even surfaces
- no impediment to plaster, adhesive, and paint adhesion
Description
SOK BTM (concrete parting agent) HU 2 is a chemicophysically reactive concrete parting agent with low viscosity.
Field of application
SOK BTM HU 2 is a special product for direct formwork stripping (e.g. HUMARBO machinery, systems for the laying of joined floors and similar).
Method of application
A thin and uniform coat of SOK BTM HU 2 is applied with a brush or a suitable mineral-oil-resistant spraying device (with T jet nozzle SS 800067) to the clean and dry formwork. Consumption for nonabsorbent formwork 60 - 80 m²/l. The product may not come into contact with copper or zinc. The water-cement ratio should not be greater than 0.43. This product is intended for concrete formulations containing Portland cement (CEM I). SOK BTM HU 2 may not be diluted with water, oils, or solvents - the delivered concentration is ready for use!
Note
- storage temperature not below -5 °C
- the storage period should not exceed 1 year
- store barrels on their sides
- reseal packaging after removal, e.g. to prevent the active substances from escaping at increased temperatures.
Industries
- Construction
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.