SOK STG
Concrete release agent preferable for the use in precasting plants
Performance Features
- Temperature of use up to 120°C (form temperature)
- universally applicable
- prevents pore formation to a large extent
- provides clean and uniform surfaces
- no adverse effect on plaster, adhesive, and paint adhesion
- even at higher form temperatures SOK STG is almost odorless when being applied
Description
SOK STG is a physico-chemically reacting concrete release agent which is preferably used for steel forms.
Field of application
SOK STG was especially designed for garage production. Furthermore the product may be used in pipe and manhole manufacturing, and on battery forms.
Method of application
A thin and uniform coatof SOK STG is applied to the clean and dry form with a brush or a suitable spraying device (with T jet nozzle SS 800067 or, at colder temperatures, SS 11002) . Consumption with non-absorbent formwork: 15-35 m²/l. SOK STG may not be diluted with water, oils, or solvents - the delivered concentration is ready for use!
Notes
- storage temperature not below -5°C
- storage period should not exceed 2 years
- store barrels horizontally
- reseal containers after use
WHG and EG Safety Data Sheet are to be respected!
Industries
- Construction
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.