LUBRODAL F 24 W

Performance Features

• can be used for metal working and casting operations as well as for warm forging
• can be diluted with water as required
• can be used at mid-range and high temperatures
• acts as a lubricant, release agent and coolant
• creates a flexible, lubricant film on the dies, which will not run off
• an effective alternative to conventional graphite/water and graphite/oil suspensions

Description

LUBRODAL F 24 W contains finely ground graphite in a water based emulsion which contains oil. LUBRODAL F 24 W is a homogenous, low-sediment, concentrated lubricant which can be diluted with tap water to any strength required. LUBRODAL F 24 W was specifically developed for warm steel forging operations. However, it can also be used for other metal working procedures.

Areas of application

LUBRODAL F 24 W is particularly suitable for high-lycomplex forging operations involving mid-range and high temperatures, e.g. for lubricating dies during warm and hot forging operations or for lubrication during semi-hot forging. In addition to its lubricating and release properties, LUBRODAL F 24 W also acts as a tool coolant. This is due to its water content. LUBRODAL F 24 W may be used in any situation where traditional graphite and water dispersions have reached the limit of their effectiveness. LUBRODAL F 24 W is an effective and economical alternative to the traditional graphite and oil suspensions used in semi-hot forging procedures.

Method of application

LUBRODAL F 24 W is a die lubricant which must be thinned with water before use. The optimum proportions of water to lubricant depend on the application, and must be tried out on site in each particular case. Depending on how it is to be used, LUBRODAL F 24 W can be mixed with water using a suitable mechanical stirrer. Despite the fact that the suspension is extremely stable, we recommend that the working liquid be continuously stirred to prevent any of the particles settling out.
LUBRODAL F 24 W can be applied to forging tools with any of the commonly used spraying equipment (automatic or manual). Its excellent wetting properties means that it can create an effective; lubrication film, even in the deepest cuts in the die.

Storage

LUBRODAL F 24 W must be stored in a closed container to prevent water evaporation creating a skin.

Guidelines for dilution:

Die forging: 5...10 parts water, 1 part LUBRODAL F 24 W
Hot forging (extrusion): 3...7 parts water, 1 part LUBRODAL F 24 W
Hammer forging: 2...10 parts water, 1 part LUBRODAL F 24 W
Semi-hot forging, complex operation: 1...2 parts water, 1 part LUBRODAL F 24 W
Semi-hot forging, subsequent stages: 2...5 parts water, 1 part LUBRODAL F 24 W