GLEITMO 830
White solid lubricant paste for cold forming
Performance Features
- temperature range: -25 / +100 °C
- proved to be reliable for most demanding requirements in stamping, drawing, strech-forming, bending, rolling and profile-forming
- suitable for highly different materials, such as steels of austenic and ferritic structures, Copper, Aluminium, Zinc and their alloys
- prevents the transfer of material to the tools (welding-up tendency) and reduces wear due to its high lubricating qualities
- is not recommended for work-pieces intended to be electro-plated or painted after forming
Description
GLEITMO 830 is a well brushable light-coloured paste, based on a special mineral oil containing a synergistic combination of GLEITMO White Solid Lubricants. Its resistance to extreme pressure and good release properties will render good results in cold-forming processes where oils and greases are no longer sufficient. The high efficiency of GLEITMO 830 is to a far extent independent of of the materials grades used.
Field of application
GLEITMO 830 can be used in cold forming processes where commonly used lubricants are not satisfactory.
Method of application
GLEITMO 830 is normally applied in undiluted condition. Depending on the process involved, the lubricant can be applied to the tool or the material. Suitable means of application are stiff brushes, cloths and sponges. Adjustment to a softer consistency is possible by dilu-tion with mineral oil, although this may cause a drop in efficiency.
Industries
- Forging
- Metal processing
- Steel, metals
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.