GLEITMO 625
Dry solid film lubricant
Performance Features
- temperature range for the dry solid lubricant: -40 / +110 °C
- to achieve low friction coefficients/grooving torques for bolted connections, with a low variation
- to avoid seizures of stainless steel bolt connections
- provides a clear, touch-proof and abrasion-resistant lubricating film
- suitable for mass parts
- saves assembly time and is particularly suited for automatic systems
- is clean and non-greasing
- very good adhesion on a lot of material surfaces
- contains a UV additive for a UV coating inspection (340 – 380 nm)
Description
GLEITMO 625 is a suspension of high-molecular polymers in water. GLEITMO 625 is used as a coating agent and develops a well adhering, touch-proof lubricating film after drying. GLEITMO 625 has been developed to achieve defined low friction coefficients with a minimum variation range.
Field of application
GLEITMO 625 is used for mass part lubrication. A typical application example is the coating of stainless-steel screws/bolts and nuts, self-tapping or self-forming screws, rivets, sheet-metal screws, and chip-board screws.
Method of application
Depending on the requirements, GLEITMO 625 can be diluted with water (at least drinking water quality). As a rule, GLEITMO 625 is used at a dilution ratios of 1 : 3 (for centrifuge coating procedures, stringent require-ments) up to 1 : 7 (for dipping). In individual cases a dilution ratio of 1 : 1 to 1 : 2 is used to achieve lowest grooving torques. The parts to be coated must be free of grease. Drums and centrifuges commonly used in the galvanising industry have proved to be convenient in case of large coating quantities. After the coating process it is recommended to dry the parts by hot air (up to a part temperature of approxi-mately 80 °C).
Note
Protect against freezing! In closed original containers at room temperature storable up to 24 months.
Industries
- Automotive
- Machinery, equipment
Specifications
Approvals
FUCHS Recommendations
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.