GLEITMO SIL 1381 DE
(formerly CHEMPLEX 1381 DE)
Low bleed, silicone fluid-based heatsink compound for electrical and electronic use
Description
GLEITMO SIL 1381 DE is a silicone fluid-based, grease-like material specially blended with fine thermally conductive metal oxide powders. This formulation results in very high thermal conductivity, low bleed and excellent high temperature stability. This highly viscous product will not harden, melt or dry out and will tenaciously adhere to metal surfaces even when exposed to high temperatures for extended periods of time.
Features/ Benifits:
- Very high thermal conductivity
- Excellent high temperature stability
- Low bleed
- Will not harden, melt or dry out
Field of application
GLEITMO SIL 1381 DE is commonly used as an interface to facilitate the transfer of heat from one area to another as well as to even out temperatures from local high temperature areas by conducting heat to larger cooler areas. Used on transistors, diodes, rectifiers and transformers.
Method of application
Various methods including automated pumping systems, by hand, brushing, or wiping. If the container shows excess oil, mix thoroughly until oil is dispersed.
Industries
- Other industries
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.