TITAN UNIVERSAL HD SAE 20
(formerly TITAN UNIVERSAL HD SAE 20W-20)
High Performance, multigrade engine oil. Designed for petrol and Diesel engines, with or without extended drain intervals. Specially developed for off-road vehicles.
Description
TITAN UNIVERSAL HD SAE 20 is used for the necessary streamlining of lubricants, above all for vehicle and equipment fleets. Whether continuously at full throttle or in STOP and GO operation, TITAN UNIVERSAL HD SAE 20 protects against wear, deposits and corrosion all the time with the lowest oil consumption. TITAN UNIVERSAL HD SAE 20 provides a clean combustion without leaving deposits in the combustion chamber.
Advantages
- No residue in the combustion chambers, on valve and piston or on exhaust gas turbines of turbochargers.
- Low oil consumption.
- Good wear protection.
Application
Under normal usage conditions, in properly maintained engines, the performance capability of the additives of TITAN UNIVERSAL HD SAE 20 makes possible oil and filter change intervals up to 30,000 km and/or 500 operating hours.
TITAN UNIVERSAL HD SAE 20 is miscible and compatible with conventional, branded engine oils. However, mixing with other engine oils should be avoided in order to fully exhaust this product’s benefits. A complete oil drain is recommended when converting to TITAN UNIVERSAL HD SAE 20.
Industries
- Agriculture, forestry
- Automotive
- Construction
- Consumer, aftermarket
- Other industries
- Power generation
- Transport
Specifications
API CF-4
API SG
SAE J300: 15W-20
Approvals
---
FUCHS Recommendations
ACEA E2
ALLISON C-4
CAT TO-2
MIL-L-2104 D
MAN 270
MB 228.0
MB 235.27
VOITH-RETARDER “A”
ZF TE-ML 02C
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.