GLEITMO RLC 3100
2-component water based PTFE solid film lubricant
Performance Features
- Temperature range for use: -70/+250 °C
- forms a dry, firmly adhering lubricant film
- adheres very well on rubber materials (e.g. NBR, EPDM…)
- is environmentally and user harm-less
- largely resistant to water, mineral oils and fuels
- offers exceptional non-stick and separating characteristics
- facilitates the assembly of parts with robots (e.g. sealing rings)
- can be used to produce coloured coatings
- contains UV-additive for coating control
Description
GLEITMO RLC 3100 is an air drying 2-component solid film lubricant having PTFE as a constituent for lubrication efficiency. The product forms a dry lubricating film, which is distinguished by its excellent lubricating effect and high degree of abrasion resistance. GLEITMO RLC 3100 is largely resistant to mineral oils and fuels.
Field of application
GLEITMO RLC 3100 is used for the lubrication of rubbers and polymers materials. GLEITMO RLC 3100 shows excellent adhesion behaviour on many materials. GLEITMO RLC 3100 can be coloured with colour additives from the “GLEITMO Colour” range in order to achieve coloured coatings on o-rings.
Method of application
The parts to be coated must be thoroughly degreased with a solvent. The component 1 (K1) should be stirred well before use.Mixing ratio: 100 parts [wt%] GLEITMO RLC 3100 K12 parts [wt%] GLEITMO RLC 3100 K2The mixture (K1+K2) can be thinned with water according to the application requirements.Pot life: It is recommended to use the batch within a range of 3h.Coating is carried out by spraying or using the dipping method (mass ware). In order to achieve quicker drying and improved adhesion of the coating, preheating of the parts to about 70-80 °C before coating has proved to be effective.
Note
Protect from freezing !Stir well before use !Shelf life: 12 month in closed original container at room temperature.
Industries
- Automotive
- Machinery, equipment
Specifications
Approvals
FUCHS Recommendations
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.