DECORDYN 350 SPRAY
Anticorrosion wax with good lubricating effect
Performance Features
- temperature range of the protective film: -40 / +70 °C
- touch-dry and long-lasting wax film
- colourless, transparent in appearance
- prevents formation of corrosion over long periods
- preserves tools and machines in ready-to-operate condition
- protects metal parts against corrosive influences in the air during transportation
- can be applied easily and economically, even electrostatic
- lubricates well, does not need to be removed before the parts are put into operation
Description
DECORDYN 350 SPRAY is a liquid anticorrosion product, which, after the evaporation of the non-polluting solvent, forms an adhesive, colourless protective film, possessing good lubricating properties. Thus it does not have to be removed before the parts are used.
Field of application
DECORDYN 350 SPRAY is used for the storage of machine parts, plastics injection moulding, casting moulds, punching-, stamping-, bending- and drawing-tools which have to be stored for periods of time but must be in ready-for-use conditions all the time.For bright machine parts and devices e.g. slide bars, guide rails, clamping alignment surfaces, which have to be reliably protected against corrosion before dispatch.For intermediate storage of high-value semifinished parts in a highly corrosive ambience.In all cases in which the removal of other anticorrosion films is necessary before use.
Method of application
Apply DECORDYN 350 SPRAY uniformly from the spray can onto the parts to be protected. In case of extremely strong corrosive influences it is recommended to increase the thickness of the protective film by repeated applications onto each dry film. During application be sure to have good ventilation.DECORDYN 350 is also available in standard packaging and these can be applied by spraying, immersion, electrostatically or via brushes onto the dry surfaces.
Note
DECORDYN 350 SPRAY should not be stored at a temperature below freezing point.
Industrije
- Agriculture, forestry
- Cement
- Construction
- Forging
- Machinery, equipment
- Metal processing
- Mining, quarrying, exploration
- Other industries
- Power generation
- Transport
- Steel, metals
Informacije prikazane na ovoj strani temelje se na iskustvu i stručnosti grupe FUCHS u segmentu razvoja i proizvodnje maziva, a predočuju trenutno stanje tehnike. Na performanse naših proizvoda može utjecati niz čimbenika, a osobito specifična upotreba, metoda primjene, radno okruženje, predobrada dijelova, moguće vanjsko onečišćenje i slično. Zbog toga ne možemo dati univerzalno važeće izjave o funkciji naših proizvoda. Naši se proizvodi ne smiju upotrebljavati u zrakoplovima / svemirskim letjelicama ili njihovim dijelovima. To se ne odnosi na slučajeve kada se proizvodi mogu ponovno ukloniti prije ugradnje dijelova u zrakoplov odnosno svemirsku letjelicu. Informacije koje su ovdje navedene općenite su i neobvezujuće smjernice. Ne dajemo nikakva izričita ni prešutna jamstva vezana za svojstva proizvoda ili za njegovu prikladnost za određenu primjenu. Stoga vam preporučujemo da se obratite inženjeru tehničke podrške grupe FUCHS kako biste raspravili o uvjetima primjene i kriterijima radne izvedbe proizvoda prije nego što ih upotrijebite. Korisnik je odgovoran za testiranje funkcionalne prikladnosti proizvoda i upotrebu proizvoda uz dužan oprez. Naši su proizvodi podložni neprestanom daljnjem razvoju. Stoga zadržavamo pravo na izmjenu naše palete proizvoda, samih proizvoda i njihovih proizvodnih procesa, kao i pojedinosti navedenih na ovoj stranici, u bilo kojem trenutku i bez upozorenja, pod uvjetom da ne postoje specifični ugovori s kupcima koji to ne bi dopuštali.