GLEITMO 935
Water-based MoS2 solid film lubricant
Performance Features
- temperature range: -180 / +250 °C
- for use with oxygen fittings up to 60 °C and 20 bar (approval test available)
- forms a dry, firmly adhering, anticorrosive lubricating film
- is resistant to high loads within a wide temperature range
- easy and economical to use
- enables long service life
- causes no soiling during leakage tests
- prevents stick-slip friction
Description
GLEITMO 935 is an aqueous, air-drying solid film lubricant based on an organic binder. Its active lubricating component is a synergic combination of solid lubricants with a predominant portion of molybdenum disulphide.
After curing, GLEITMO 935 produces an even, touch-proof, adherent, mineral oil-resistant dry lubricating film, which additionally provides corrosion prevention.
Field of application
GLEITMO 935 is especially designed for threaded caps on oxygen cylinders, slideways and guideways, adjusting parts and screws in the presence of oxygen.
Method of application
GLEITMO 935 can be applied by spraying, dipping or by brush or roller onto the thoroughly cleaned and degreased sliding surfaces. Coating of one slide surface is often enough. Burrs and sharp edges are to be avoided. GLEITMO 935 should be stirred well before use. If needed, it can be diluted using demineralized water. Preheated surfaces allow fast drying and film development. The life of the lubricating film can be in-creased by roughening the surface to be coated.
Note
GLEITMO 935 is listed at Messer Griesheim with the material number 77030601.
Stir well before use! Protect from frost! Shelf life: 12 months in closed original containers at room temperature.
Industries
- Machinery, equipment
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.