ANTICORIT DFW
ANTICORIT DFW contains a combination of film forming and dewatering agents, which ensure rapid water displacement to produce a thin dry wax coating. The light film formed maximises protection from corrosive atmospheres and provides long-term water resistance. Anticorit DFW does not attract dust.
ANTICORIT DFW is suitable for components, which have been machined with water miscible fluids and require long-term storage prior to further use. Exposed surfaces of plant and equipment, which have been decommissioned for extended periods can be protected by application of ANTICORIT DFW. Maximum internal and cavity protection will be assured by the penetrating nature of the product.
ANTICORIT DFW is also suitable for protection during transportation. It is recommended the film be removed before reusing treated equipment.
ANTICORIT DFW can easily be removed with common hydrocarbon solvents. Fuchs recommends the use of the non-DG RENOCLEAN DEGREASER 9110 for most workshop environments.
Industries
- Metal processing
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.