HYKOGEEN LS 507
High temperature lubricant
Performance Features
- temperature range: -20 / +1000 °C
- is well suited as casting ladle facing
- lubricates and separates well even at very high temperatures
- increases functional reliability and prolongs the service life of hot system parts and tools
- is classified as non-hazardous as defined by German legislation on hazardous substances
Description
HYKOGEEN LS 507 is a grey lubricating paste, with good lubricating properties, for use at high temperatures. A special synthetic oil containing a large amount of white solid lubricant combination lends this product good lubrication and separating properties. The carrier oil evaporates gradually at continuous temperatures exceeding 180 °C. A dry anti-friction film is formed which performs the task of lubrication under mixed and boundary friction conditions, and provides protection against wear. There is only very slight residue from the carrier oil, and this residue has a favourable effect during subsequent lubrication.
Field of application
Facing for casting ladles, tools, funnels and spouts in aluminium die casting.
Lubrication of slowly moving bearings, bolts, hinges, slipper pads and slide rails on firing, drying and annealing systems especially melting furnaces. Steelworks: coke discharging machines, connections rods and scot blowers.Die casting machines: ejector pins and other moving parts.
Wherever high temperatures preclude the use of oils and greases and wherever slow movements occur or a good separating effect is required.
Method of application
Die casting: Apply a thin film on the paste using a brush or tassel. Burn in above the melting or flame off until the pasty coating is dry - until the dry light-grey residue is obtained.
Průmysly
- Casting
- Metal processing
Informace zobrazená na této straně vychází ze zkušeností a znalostí společnosti FUCHS Group ve vývoji a výrobě maziv a reprezentuje nejmodernější technologie. Výkon našich produktů může být ovlivněn několika faktory, zejména specifickým použitím, způsobem použití, provozním prostředím, předpřípravou součástí, možnou vnější kontaminací atd. Z tohoto důvodu není možné podat univerzálně platné rady ohledně funkce našich výrobků. Naše výrobky nesmí být použity v letadlech/raketách nebo v jejich částech. To neplatí, jestliže může být produkt odstraněn předtím, než bude součást znovu vrácena do letadla/rakety. Zde podávané informace jsou obecná, nezávazná doporučení. Není podávána žádná záruka, výslovná či odvozená, na vlastnosti produktu nebo jeho vhodnost pro dané použití. Proto doporučujeme, abyste konzultovali inženýra společnosti FUCHS Group, se kterým můžete prodiskutovat podmínky použití a výkonnostní kritéria produktů, než je použijete. Je odpovědností uživatele vyzkoušet funkční vhodnost produktu a používat jej s odpovídající péčí. Naše produkty jsou v neustálém vývoji. Zachováváme si proto právo kdykoliv měnit naši produktovou řadu, produkty a jejich výrobní procesy, ale také všechny údaje na této stránce, a to kdykoliv a bez upozornění, jestliže neexistuje specifická dohoda se zákazníkem, která vyžaduje opak.