SOK HU2-GHS
Concrete release agent for the use in precasting plants
Performance Features
- Temperature for use up to 85°C (form temperature)
- prevents pore and shrinkage formation to a large extent
- provides clean and uniform surfaces
- no adverse effect on plaster, adhesive, and paint adhesion
Description
SOK HU2 GHS is a physico-chemically reacting concrete release agent for a direct release from the form, e.g. for concrete sleepers.
Field of application
SOK HU2 GHS is a special product for a direct release from the form (e.g. HUMARBO machinery, systems to manufacture slatted floors, concrete sleepers, and others).
Method of application
A thin and uniform coat of SOK H 2 GHS is applied to the clean and dry formwork with a brush or a suitable mineral oil-proof spraying device (with T jet nozzle SS 800067). Consumption for non-absorbent formwork 40-60 m²/l.
The product may not get into contact with copper or zinc.
SOK HU2 GHS may not be diluted with water, oils, or solvents - the delivered concentration is ready for use!
Notes
- storage temperature not below -5°C
- storage period should not exceed 1 year
- store barrels horizontally
- reseal containers after use
Industries
- Construction
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.