ANTICORIT 5F
Dewatering fluid, waxy
Description
ANTICORIT 5F is the name of ANTICORIT DFW 6301 when filled in spraying cans. It displaces actively water from the surface and leaves a soft waxy protection film after evaporation of the solvent. It is suitable for interprocess storage and also as transport protection of components. It may be combined with VCI-products, too.
Application
ANTICORIT 5F should be applied evenly on the surface to be protected. While spraying the product, ensure proper ventilation and follow the valid safety instructions. ANTICORIT 5F can be removed with water based industrial cleaners or with solvents of the RENOCLEAN series. In some applications a removal from the surface is not necessary as ANTICORIT 5F is compatible with common lubricants.
Advantages
- Intensive and improved dewatering
- Very short drying times
- Good corrosion protection
- Thin, waxy-greasy film
- All-round applicable
- Free of barium
- Very good compatibility with many material
Storage conditions
If sealed in the original container the product can be stored at temperatures between +5°C to +40°C for 3 years. The indication of a minimum period of storage does not include any guarantee of durability.
Industries
- Automotive
- Consumer, aftermarket
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.