ECOCUT BX 15
Low-misting, neat cutting fluid based on high-quality solvent refined cuts.
Description
ECOCUT BX 15 is a low-misting, neat cutting fluid based on high-quality solvent refined cuts. It contains a chlorine-free EP package and polar friction modifiers. A carefully selected combination of additives in ECOCUT BX 15 significantly reduces misting in comparison to conventional cutting oils.
Application
ECOCUT BX 15 is a high-performance metalworking oil for difficult and very difficult machining operations. ECOCUT BX 15 is primarily recommended for deep hole drilling, broaching, milling, thread cutting, gear shaping and gear hobbing. ECOCUT BX 15 increases efficiency by prolonging tool life and allowing cutting oil stocks to be rationalized. ECOCUT BX 15 is suitable for the use with yellow metals only in a limited extent. We recommend a pretest.
Benefits
- low evaporation
- low misting
- high tool life
- excellent corrosion protection
- optimum cooling and lubricating effect performance
- chlorine-free EP additives
Industries
- Metal processing
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.