STOPRED
STOPRED is a high performance brake fluid for clutch and brake systems in passenger cars and trucks. It fulfils the new FMVSS 116 DOT 4 and SAE J-1704 specifications as well as SAE J-1703 / Oct. 2000 specifications.
STOPRED was developed for heavy duty applications and may be used in all passenger cars, commercial vehicles and motor cycles manufactured in the USA, Europe or Japan where an FMVSS DOT 4 fluid is specified. It offers absolute reliability at all temperature between -40oC and 270oC and guards against clutch and brake problems. It is safely miscible with all brand name fluids of the same specification but can NOT be used in certain Citroen or other vehicles requiring a special mineral oil based fluid.
STOPRED is formulated specially to provide low moisture absorption thereby maintaining the fluid’s high boiling point and is specially inhibited to ensure long term protection against rust and corrosion together with additives to provide the correct degree of seal swelling.
Industries
Specifications
Approvals
FUCHS Recommendations
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.