GLEITMO 615

Performance Features

• temperature range for the dry film: -40 / +110 °C
• to achieve low friction coefficients/grooving torques for bolted connections, with a low variation
• to avoid seizures of stainless steel connections
• provides a touch-proof and abrasion-resistant clear lubricating film
• is suitable for bulk parts
• saves assembly time and is especially suitable for automatic bolting systems
• is clean and non-greasing
• has a very good surface adhesion on a lot of materials
• contains a UV additive for a UV coating inspection (340 - 380 nm)

Description

GLEITMO 615 is a suspension of high-molecular polymers in water. GLEITMO 615 is used as a coating agent and develops a well adhering, touch-proof lubricating film after drying. GLEITMO 615 has been developed to achieve defined low friction coefficients with a minimum variation range.

Field of application

GLEITMO 615 is used for bulk-part lubrication. A typical application example is the coating of stain-less-steel screws and nuts, self-tapping and self-forming screws, rivets, sheet-metal screws, and chip-board screws.

Method of application

Depending on the requirements, GLEITMO 615 can be diluted in water (at least of drinking water quality). As a rule, GLEITMO 615 is used at dilution ratios of 1 : 3 (for centrifuge coating procedures, stringent requirements) up to 1 : 7 (for dipping). In individual cases a dilution ratio of 1 : 1 to 1 : 2 is used to achieve minimum grooving torques. The parts to be coated must be free of grease. Drums and centrifuges commonly used in the galvanizing industry have proved to be convenient for coating large quantities. After the coating process it is recommended to dry the parts by hot air (up to a part temperature of approx. 80 °C).

Note

Protect against freezing! In closed original containers at room temperature storable up to 24 months.