TITAN Supersyn LONGLIFE PLUS SAE 0W-30
Ultra High Performance, extreme fuel-economy engine oil formulated with fully synthetic base oil for VW engines.
Description
TITAN Supersyn LONGLIFE PLUS SAE 0W-30 has been designed especially for VW and AUDI diesel and gasoline engines for extended oil drain intervals (WIV) including the diesel engines with Pump unit Injector technology which require motor oil according VW 506 01. The formulation is based on State-of-the-Art LongLife Additive Technology and synthetic base oils. TITAN Supersyn LONGLIFE PLUS SAE 0W-30 provides highest performance in all diesel and gasoline engines. With all-season capability it performs perfectly even under the most severe climate conditions. With optimised HTHS Viscosity TITAN Supersyn LONGLIFE PLUS SAE 0W-30 ensures maximum fuel economy.
Application
TITAN Supersyn LONGLIFE PLUS SAE 0W-30 was developed for VW engines with an extremely good energy conserving characteristic. It is used for nearly all Diesel and gasoline engines, including engines with pump unit injectors.
TITAN Supersyn LONGLIFE PLUS SAE 0W-30 is miscible and compatible with conventional branded engine oils. However, mixing with other engine oils should be avoided in order to fully utilize the product’s benefits. A complete oil change is recommended when converting to TITAN Supersyn LONGLIFE PLUS SAE 0W-30. For information on product safety and proper disposal please refer to the latest Material Safety Data Sheet.
Advantages/Benefits
- Lower Maintenance Costs. The approved super longlife characteristic of TITAN Supersyn LONGLIFE PLUS SAE 0W-30 allows extended oil change intervals according to the VW and AUDI specifications (WIV)
- Environmentally Aware. Due to lower fuel consumption, reduced emissions, faster warm-up after cold start and extended service intervals
- Outstanding Protection against Wear. Due to up to 60% reduced oiling time after start-up and absolutely reliable lubrication even under high temperature and on-going high speed motorway operation
- Best Thermal and Shear Stability. Due to an outstanding Stay-in-Grade Performance TITAN Supersyn LONGLIFE PLUS SAE 0W-30 ensures reliable lubrication even under the most severe load and ambient conditions
- Minimal Oil Consumption. Due to extremely low evaporation losses from using highest quality base oils only
Industries
- Automotive
- Consumer, aftermarket
- Agriculture, forestry
Specifications
Approvals
- VW 503 00/506 00/506 01
FUCHS Recommendations
- BMW LONGLIFE 01-FE
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.