ANTICORIT SYNTH SPRAY
All purpose corrosion protection spray
Description
ANTICORIT SYNTH SPRAY is based on fully synthetic universal oil with mild odour and excellent penetration properties. The product leaves a thin oily and transparent film with an outstanding corrosion protection. This film can be removed easily with low alkaline cleaners. Best on the unique lubrication effect squeaking and stick-slip effects will be minimised. The dewatering effect and excellent cleaning ability of ANTICORIT SYNTH SPRAY secures electrical contacts, this means the product can be used for initial aid of engines. The product can be applied as simple cutting oil, too. ANTICORIT SYNTH SPRAY is free of silicones, Teflon, graphite, MoS2, CFC and heavy metals.
Application
ANTICORIT SYNTH SPRAY can be used in the industry, in service garages, in housekeeping and in sports or hobby fields. ANTICORIT SYNTH SPRAY is applied directly on the surface. It penetrates excellent in gaps and jointing’s. After drying, the product forms a highly effective, thin and a not resinifying protection film. The spray can is equipped with a ball valve and a sprinkler hose, an application out of every position is herewith possible. The typical properties listed in the table reflecting the pure product without blowing gas.
Advantages
- Stops squeaking and stick-slip effects
- Outstanding corrosion protection
- Dissolves tight or corroded connections
- Can be used as cutting oil
- Dewatering effect
- Secures electrical contacts
- Lubricating and cleaning effect
- Free of silicon, Teflon, graphite, MoS2, CFC and heavy metals
Storage conditions
ANTICORIT SYNTH SPRAY can be stored up to 24 months. The indication of a minimum period of storage does not include any guarantee of durability. Do not expose can in direct sunlight and do not heat it up to temperatures higher than + 50 °C.
Industries
- Automotive
- Consumer, aftermarket
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.