RENOLIN CLPF SUPER-SERIES
EP industrial gear oils containing MoS2 (molybdenum disulphide) with extremely high load carrying capacity and excellent wear protection
Description
The RENOLIN CLPF SUPER oils are industrial gear oils which combine the properties of chemical antiwear additives (phosphorus-sulphur chemistry) with physically active anti-wear layers (molybdenum disulphide – MoS2). The synergistic effect of phosphorus-sulphur additives of the latest generation with MoS2 guarantees highest anti-wear performance and extremely high load carrying capacity. The physically active layers of MoS2 guarantee excellent lubricity at low temperature over a wide range of working conditions. The RENOLIN CLPF SUPER oils offer excellent ageing stability and very good corrosion protection. The MoS2 as solid lubricant ensures reliable wear protection even under shock loads and unfavourable operating conditions. The MoS2 dampens vibrations and noise. Smoothing of previously-damaged tooth flanks in gear sets is observed. The solid lubricant MoS2 can also increase the load carrying capacity by smoothing damaged surfaces (increase of the specific surface). Selected detergent / dispersant components dissolve the solid lubricant stable in the base oil and guarantee excellent wetting of metal surfaces in practice. Therefore the phosphorussulphur- as well as the MoS2-components can ensure the anti-wear / extreme pressure performance.
Advantages
- Excellent corrosion protection
- Low foaming, good air release
- High ageing stability
- Extremely high load carrying capacity
- Excellent bearing wear protection – low wear in the FE8 test
- Excellent protection from scuffing, also at elevated as well as low velocity and temperature – excellent wear protection – FZG
- Excellent micropitting resistance
- Excellent Brugger wear protection
- Dampen vibrations and noise
- Good anti-seizing properties
- Smoothing effect of pre-damaged surfaces
Application
The RENOLIN CLPF SUPER oils are used for all kinds of industrial applications where the manufacturer recommends the use of a vibration and noise-dampening industrial gear oil, type CLP according to DIN 51 517-3. The RENOLIN CLPF SUPER products can be recommended for highlystressed, highly-loaded bearings, joints, pressing screws, spur and worm gears and spindles. RENOLIN CLPF SUPER can be used up to 100°C and even at brief peak temperatures up to 120- 150°C. The RENOLIN CLPF SUPER oils are particularly suited for lubricating impact crushers and gears subjected to shock load reversals.
Industries
- Mining, quarrying, exploration
- Agriculture, forestry
- Power generation
- Construction
- Transport
- Machinery, equipment
- Cement
- Forging
- Casting
- Metal processing
- Other industries
- Steel, metals
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.