RENOLIN MR-SERIES
Special lubricating and hydraulic fluids with excellent corrosion protection
Description
The products of the RENOLIN MR-series are special HLP-D lubricating and hydraulic fluids according to DIN 51502 with excellent corrosion protection, outstanding contaminant-removing and transportation properties (detergent / dispersant properties). RENOLIN MR contains zinc and is used as a problem solver in hydraulic systems where standard oils fail.
Application
RENOLIN MR are lubricating oils for circulation and bearing lubrication, superbly suited for applications in mobile and stationary hydraulic systems where the use of a detergent / dispersant hydraulic oil with low friction coefficients, good stick-slip behaviour and excellent corrosion protection properties is required. RENOLIN MR is also suited for use as high-speed spindle oil, break-in oil, and corrosion protection oil.
Advantages
- Excellent corrosion protection (see: test results)
- Low foaming tendency
- Good air release properties
- High ageing resistance
- Good viscosity-temperature behaviour
- Protects against wear
- Excellent contaminant-removing and transportation properties (detergent / dispersant properties)
- Low friction coefficient
- Reduces stick-slip effects
Excellent Corrosion Protection
The RENOLIN MR oils have excellent corrosion protection properties that are typically expected only of special designed corrosion-protection oils. The excellent corrosion protection properties of the RENOLIN MR oils ensure that corrosion does not occur on steel and nonferrous metals in the system, even in the presence of water. We therefore recommend the use of RENOLIN MR oils as break-in oils and operational fluids. The metallic surfaces coated with these oils are safely protected against corrosion when stored properly.
For comparison:
RENOLIN MR 15
Test method | According to | Unit |
|
Corrosive effect on copper, 100A24 | DIN EN ISO 2160 | Degree of corrosion | 1 |
Steel corrosion | DIN ISO 7120 | Degree of corrosion | 0-A |
Hydrobromic acid immersion test | DIN 51 357 | Degree of corrosion / number of sheets | 0/3 |
Sea-water immersion test | DIN 51 358 | Degree of corrosion / number of sheets | 0/3 |
Damp heat atmosphere | DIN 50 017 SFW | Degree of corrosion / number of sheets, cycles | 0/3 after 8 x 24 h |
Industries
- Steel, metals
- Mining, quarrying, exploration
- Machinery, equipment
- Construction
- Other industries
- Metal processing
- Power generation
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.