RENOLIN THERM 320
Heat transfer fluid
Description
RENOLIN THERM 320 is a high-performance heat transfer fluid based on selected, highly refined mineral oils for use in the liquid phase in closed heat transfer systems with forced circulation. RENOLIN THERM 320 (heat transfer oil Q DIN 51522) can be used over the entire working range without pressure overlap.
Application
RENOLIN THERM 320 is perfectly suitable for use in the indirect heating of reactors, polymerization and distillation systems, processing machines and driers, as well as heat exchangers in processing systems, and in systems for heat recovery. The heat transfer fluid is best used at temperatures ranging from 200 °C to 300 °C. The upper limit for use is an inlet temperature of 300 °C. The film temperature should not exceed 320 °C.
Advantages
- Excellent thermal stability
- Extremely low coking
- Low residue formation, clean systems
- Good heat transfer properties
- Protects against corrosion
- Long service life
- Pumpable to + 5 °C
- Permissible film temperature: 320 °C
Industries
- Steel, metals
- Power generation
- Forging
- Casting
- Metal processing
- Other industries
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.