TITAN UNIVERSAL HD SAE 10W
High-performance monograde oils for gasoline and diesel engines. Specially developed for off-road vehicles. Depending upon manufacturer regulation also in other aggregates applicable.
Description
TITAN UNIVERSAL HD 10W is used for the necessary streamlining of lubricants, above all for vehicle and equipment fleets. The right engine oil is available with TITAN UNIVERSAL HD 10W. Whether continuously at full throttle or in STOP and GO operation, TITAN UNIVERSAL HD 10W protects against wear, deposits and corrosion all the time with the lowest oil consumption. Another important point for use in practice: engines lubricated with TITAN UNIVERSAL HD 10W have no sacrifices in performance because of unallowable deposits in the combustion chambers. TITAN UNIVERSAL HD 10W provides for proper function of hydraulic valve lifters (hydraulic valve compensation) even during extended oil change intervals.
Application
Under normal usage conditions, in properly maintained engines, the performance capability of the TITAN UNIVERSAL HD 10W additives makes possible oil and filter change intervals up to 30,000 km and/or 500 operating hours. We will be happy to provide information on the possible programming of oil and filter change intervals for specific cases. The viscosity recommendations on page 3 have been tested for Central European climate conditions; please note the manufacturer’s viscosity recommendations. TITAN UNIVERSAL HD 10W is miscible and compatible with conventional branded engine oils. However, mixing with other engine oils should be avoided in order to fully utilize the product’s benefits. A complete oil change is recommended when converting to TITAN UNIVERSAL HD 10W. For information on product safety and proper disposal please refer to the latest Material Safety Data Sheet.
Advantages/Benefits
- No residue in the combustion chambers, on valve and piston or on exhaust gas turbines of turbochargers
- Active over the long term and makes possible the full utilization of the oil and filter change intervals
- Offers the lowest oil consumption
Industries
- Agriculture, forestry
- Automotive
- Construction
- Consumer, aftermarket
- Other industries
- Power generation
- Transport
Specifications
Approvals
- MAN 270
- ZF TE-ML 03B (ZF002013)
FUCHS Recommendations
- ACEA E2
- API CF-4/SG
- MIL-L-2104 D
- ALLISON C-4
- CAT TO-2
- MB 228.0
- ZF TE-ML 02C
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.