TITAN LS-CONCENTRATE
Description
TITAN LS-CONCENTRATE is an auxiliary additive for professional use only. If standard axle oil are used in limited slip differentials and if standard lubricants are used in wet break applications, jerking and squawking may occur. At a dosage of 2 to max. 5%-vol., TITAN LS-CONCENTRATE significantly reduces or even completely eliminates these problems. For safety information and proper disposal please refer to the latest Material Safety Data Sheet.
Advantages/Benefits
- Reliably avoids noises
- Prevents annoying jerking
- Provides rationalisation potential
Application
- Suitable for axle and gear oils only
- Do not use in combination with UTTOs, STOUs, ATFs and MTFs
- In case of any question or uncertainness please contact your locale FUCHS dealer
- Overtreating or frequently dosages can reduce wear protection!
- Canister must be shaken well before using. To ensure a sufficient homogenization TITAN LSCONCENTRATE must only be added directly into the compartment. (e.g. with beakers or injections)
- The product can be a semi-solid at ambient temperatures or if it is stored below its pour point. In this case it is recommended to heat the product up to 40-60°C before usage and to mix it until it is a clear, homogeneous mixture.
- Water contamination must be avoided!
- Adding additive to a lubricant is a lubricant modification, for which FUCHS SCHMIERSTOFFE GmbH cannot give any guarantee.
Industries
- Automotive
- Consumer, aftermarket
Specifications
Approvals
FUCHS Recommendations
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.