TITAN CFE MC SAE 10W-40
Ultra High Performance, fuel-economy oil based on MC-Synthesis with solid lubricant additive MoS2 for engines in commercial vehicles and passenger cars. Reduces friction and suppresses noise. Good cold starting and lower oil consumption.
Description
TITAN CFE MC SAE 10W-40 is an all season engine oil that ensures cold starts and has optimum viscosity (SAE Class 10W-40) for gasoline and diesel engines with and without turbocharging under the most severe operating conditions. TITAN CFE MC SAE 10W-40 forms by the use of an optimal solid lubricant combination an almost indestructible emergency lubrication film at all friction locations. This reduces not only wear to an extraordinary extent, but also achieves a significant reduction in fuel consumption. The solid lubricants used in TITAN CFE MC SAE 10W-40 are held in suspension, finely dispersed in oil.
Application
Regardless of their service life, all diesel and gasoline engines can be changed over to TITAN CFE MC SAE 10W-40.TITAN CFE MC SAE 10W-40 also provides the lubrication streamlining desired by all engineers since, in addition to gasoline and diesel engines, with and without turbocharging, it can also be used in transmissions for which SAE Class 80 and/or 80W would otherwise be used according to API-GL 3 or API-GL 4. TITAN TITAN CFE MC SAE 10W-40 is miscible and compatible with conventional branded engine oils. However, intermixtures with other engine oils should be avoided in order to fully utilize the product’s benefits. Respectively a complete oil change is recommended when converting to TITAN CFE MC SAE 10W-40 For information on product safety and proper disposal please refer to the latest Material Safety Data Sheet. NOTE - Homogenize product before use.
Advantages/Benefits
- Lowest possible wear, especially in the critical operating phases of cold start, warm-up and full throttle. Even under continuous full throttle stresses at high oil sump temperatures, TITAN CFE MC SAE 10W40 provides reliable protection against wear
- Reduction of fuel consumption under all operating conditions
- Reduction in engine running noise
- Safety against sludge, coking, adhesion, varnish formation and corrosion even under unfavorable operating conditions.
- Protection against undesirable cylinder bore polishing in high-performance engines
- Complete miscibility and compatibility with all brand name monograde and multigrade oils
Industries
- Consumer, aftermarket
- Automotive
- Transport
Specifications
Approvals
FUCHS Recommendations
- ACEA E3/A3/B3
- API CG-4/SJ
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.