TITAN GT1 LONGLIFE IV SAE 0W-20 New
TITAN GT1 LONGLIFE IV 0W-20 is an innovative premium performance low-viscosity engine oil. The combination of state-of-the-art additive technology with a new base oil matrix provides the highest levels of performance regarding oxidation stability, resistance to oil aeration, wear protection, and shear stability. Featuring BluEV Technology, TITAN GT1 LONGLIFE IV SAE 0W-20 meets the performance requirements of conventional as well as modern hybrid engines.
• Developed specifically for modern VW gasoline and diesel engines that have been approved for the
use of this oil
• Reduced fuel consumption by more than 4% in the M111 FE Test. This is due to its low dynamic
viscosity at 150°C (HTHS) in combination with fully synthetic base oils
• Allows for extended oil change intervals
• Superior wear and tear protection under all operating conditions despite its extremely low viscosity
• Suitable for selected hybrid vehicles depending on OEM requirements.
| Pack Sizes | 5L | 20L | 205L |
| Material No. | 602008091 | 602292285 | 602298850 |
| Part No. | 503605 | 503620 | 5036205 |
Industries
- Automotive
- Consumer, aftermarket
- Transport
Specifications
ACEA C5
FORD WSS-M2C956-A1
Approvals
VW 508 00/509 00
Porsche C20
FUCHS Recommendations
The information shown on this side is based on the experience and expertise of the FUCHS Group in the development and manufacture of lubricants and represents the current state of the art. The performance of our products can be influenced by a series of factors, especially the specific use, the method of application, the operational environment, component pretreatment, possible external contamination, etc. For this reason, universally valid statements about the function of our products are not possible. Our products must not be used in aircraft/spacecraft or parts thereof. This does not apply if the products can be removed again before the components are fitted in an aircraft/spacecraft. The information given here represents general, non-binding guidelines. No warranty expressed or implied is given concerning the properties of the product or its suitability for any given application. We therefore recommend that you consult a FUCHS Group application engineer to discuss application conditions and the performance criteria of the products before the products are used. It is the responsibility of the user to test the functional suitability of the products and to use them with the corresponding care. Our products are subject to continuous further development. We therefore retain the right to change our product range, the products, and their manufacturing processes as well as all details on this side at any time and without warning, provided that no customer-specific agreements exist that require otherwise.